Mining Water Treatment
Mining Water Treatment
PAM, PAC & PFS
PAM, PAC and PFS for tailings settling, clarification, sludge dewatering and process-water reuse. Start with the water and separation target.

Application comes first
What is happening
in your water circuit?
We support selection discussions around the actual water or slurry, rather than treating every mine as the same application.
Tailings settling & clarification
Discuss slow sedimentation, fine solids and cloudy overflow against the feed, slurry and return-water conditions.
Sludge dewatering
Review the slurry, filtration or dewatering stage, current chemical route and the cake or filtrate result you need.
Process-water reuse
Consider water quality, existing reagent carryover and the operating objective of the recycle-water circuit.
Three core product families
PAM. PAC. PFS.
Their roles differ. Product matching and the comparison trial should reflect your actual treatment objective.

PAM
Polyacrylamide
Flocculation, settling and sludge dewatering.
Ionic type and grade are discussed against solids, mineralogy, water chemistry and the separation objective.

PAC
Polyaluminium chloride
Coagulation and suspended-solids removal.
Review turbidity, pH, water composition and whether coagulation is needed before or alongside flocculation.

PFS
Polyferric sulfate
Coagulation for selected wastewater conditions.
Review impurity type, water chemistry, settling behavior and downstream handling requirements.
Prepare the selection basis
Bring the water data
into the conversation.
| Information | What to share |
|---|---|
| Water or slurry source | Ore type, process stage, solids concentration and relevant operating changes |
| Water characteristics | Available pH, turbidity, composition and settling observations |
| Current treatment | Product or grade, preparation method, dosage reference and observed result |
| Treatment target | Overflow clarity, settling behavior, dewatering, recycle-water or discharge-handling objective |
01
Define the comparison
Agree the sample, treatment target and current baseline.
02
Evaluate product fit
Discuss relevant grades and a jar-test or sample-evaluation method.
03
Connect results to supply
Review the test record, packaging, quantity, destination and follow-up requirements.
Buyer questions
Before the next step.
Which PAM grade fits mine tailings?
The preferred ionic type and grade depend on the solids, mineralogy, water chemistry and the settling or dewatering objective. Share current water data and treatment results before comparing options.
When are PAC and PFS considered?
They are discussed where coagulation, suspended-solids removal or impurity handling is needed. The choice and treatment sequence depend on the water conditions and comparison results.
Can I request a sample evaluation?
Yes. Send the water or slurry source, available solids and pH data, current product and treatment objective so an evaluation discussion can begin.
Do you supply for repeat or bulk orders?
Yes. Discuss the selected product, quantity, packaging, destination and order schedule with the supply team.
Start a technical conversation
Start with your water.
Define the result you need.
Share the water source, current chemical route and clarification or dewatering target.




